Parameters of Direct Current Circuit Breaker
Rated Current:
● Definition: The maximum current value that a circuit breaker can continuously conduct.
● Importance: It is a crucial indicator for selecting the appropriate circuit breaker capacity.
● Common Range: Depending on the application, the rated current range is wide, ranging from tens of amperes to thousands of amperes.
Rated Short-Circuit Breaking Capacity:
● Definition: The ability of a circuit breaker to open normally and remain disconnected when a short-circuit fault occurs.
● Importance: Reflects the circuit breaker's tolerance under short-circuit conditions.
● Expression: Usually specified in terms of the short-circuit current capacity (kA) of the circuit breaker.
Operation Mode:
● Definition: The manner in which a circuit breaker performs opening and closing operations.
Classification:
● Manual: Requires manual operation for opening and closing.
● Electric: Automatically opens and closes via control signals.
● Importance: Determines operational convenience and automation level of the circuit breaker.
▲ Polarity:
Definition: DC circuit breakers can be categorized into unidirectional and bidirectional types based on their polarity.
▲ Classification:
Unidirectional: Can only disconnect the circuit in one direction.
Bidirectional: Can break the circuit in both directions.
Importance: Select the appropriate polarity type based on circuit requirements.
▲ Opening Time:
Definition: The time from when the circuit breaker is triggered to when it fully disconnects.
Importance: Should be minimized to protect electrical equipment from overload and short circuits.
Typical Value: Opening time varies depending on circuit breaker type and specifications, generally aiming to be as short as possible.
▲ Closing Time:
Definition: The time from when the direct current circuit breaker is disconnected to when it is fully closed.
Importance: Should also be minimized to restore power to the circuit quickly.
Typical Value: Closing time is usually short, varying based on circuit breaker design and application requirements.
▲ Operating Voltage:
Definition: The voltage range required for the circuit breaker to operate normally.
Importance: Ensures proper operation within specified voltage ranges.
Range: Operating voltages vary based on circuit breaker design and application requirements.
▲ Ambient Temperature:
Definition: The ambient temperature range in which the circuit breaker can operate effectively.
Importance: Operating outside this temperature range may affect performance.
Range: Typically specified based on circuit breaker design and application requirements.
By considering these parameters, the selection and operation of direct current circuit breakers can be optimized for various applications.
Hot Tags: direct current circuit breaker, China direct current circuit breaker manufacturers, suppliers, factory, Molded Case Breaker, Residual Current Circuit Breakers, fire fighting energency starting device, Molded Breaker, Air Circuit Breaker, Moulded Case Breaker
