1) Open the valve on the fresh water pipe and fill the emergency fire pump suction pipe with water
2) Turn the engine and put the flywheel in the start position
3) Put the engine throttle in the start position
4) The emergency fire pump suction valve must be opened
5) The emergency fire pump outlet valve must be opened
6) The pressure relief rod on the emergency fire pump engine cylinder head is placed in the start position
7) Open the vent valve and operate the vacuum pump to discharge the gas in the pipeline
8) If the cylinder pressure is low, the starting air must be operated again until the pressure reaches 4KG/C㎡
9) When the fuel handle is placed in the 0 position, stop the emergency fire pump